EPA Units

X Series

X Series

In response to the new EPA regulation, Heatmor introduces the X-Series Model 350X into their current line of stainless steel outdoor furnaces with an efficiency rating of 58% and higher.


Model200 X - DISCONTINUED350 X
Overall Width50"50"
Overall Height82.5"82.5"
Overall Length95"95"
Total Weight (lbs, without water)1,8351,980
Water Capacity (US Gallons)310270
Forced Draft (C.F.M.)1502x 150
Chimney Diameter8" or 10" Insulated8" or 10" Insulated
Maximum Wood Legth (inches)1930
Insulated Heating Area (sq. ft.)* 1 Loading/day 2 Loading/day2500 50004000 8000
Heating Area (Sq. Ft.)*5,0008,000
Firebox Dimensions (inches)20" W x 18" H20" W x 18" H
Volume of Firebox (Cu. Ft.)1421
Firebox Door Size (inches)20 W x 18 H20 W x 18 H
Flue Transfer Area (Sq. Ft.)39.7539.75
BTU’s (maximum)**200,000280,000
Water Jacket Steel409 Stainless, 10 Gauge409 Stainless, 10 Gauge
Firebox Steel409 Stainless, 10 Gauge409 Stainless, 10 Gauge
Base Steel409 Stainless, 14 Gauge409 Stainless, 14 Gauge
409 Stainless,409 Stainless409 Stainless
Base of Unit to Bottom of Loading Door (inches)2424
Warranty, WorkmanshipLimited LifetimeLimited Lifetime
Warranty, CorrosionLimited LifetimeLimited Lifetime
Approvals Test StandardsUL 2523-2009 CSA-B366.1-11UL 2523-2009 CSA-B366.1-11
Type of FuelWoodWood
Electrical Supply115 V, 60 Hz, 1 Phase115 V, 60 Hz, 1 Phase

*This is an estimate only. Acutal loadings per day may vary depending on structures heated, type of wood used, and climate.

**This value should only be used as an indication of the furnace’s heat recovery ability. Sustained outputs at this rate will increase the loadings per day. Some types of wood may prevent the furnace from reaching this masimum output.

Pad Specifications

Colour Options